Make sure this part fits

Check fitment

BEST SELLER

Kahuna Heated Hand Grips

Name: Kahuna Heated Hand Grips
Brand: Harley-Davidson
SKU: 56100318
Availability: InStock
Rating: 4.28 (55 reviews)

4.28

See 54 reviews

Part Number: 56100318

Color: Chrome

Select your store for local inventory details

Pay with Affirm on orders over $50.

Keep comfortable on cool morning or frigid night rides. These thermostatically controlled grips feature variable heat settings controlled with a military grade resistor, and use automatic temperature monitoring to adjust to ambient temperatures. Grips have been thermally mapped to provide a more uniform heat and are designed to achieve a maximum operating temperature approximately 20° Fahrenheit warmer than previous accessory heated grips for added warmth during cold rides.

Description

• With both hands on the grips, they remain at a constant temperature regardless of changes in outside temperature

• Self-contained control circuit and control knob means no additional switches or controller boxes to mount

• Switched on/off with the ignition to avoid draining your battery

• Easy-to-install glueless design allows removal of the grips without damage

• Deeply grooved, rich black rubber provides the grip you need while a deep Bar & Shield logo and dark gloss black add stylish accent

• Complements the Chrome Kahuna Collection Engine Trim

• Chrome finish

Details

Fits ’16-’17 Dyna FXDLS, ’16-'24 Softail and ’08-later Touring (except '23-later FLHXSE, FLTRXSE, '24-later FLHX, FLTRX and FLTRXSTSE and '25-later FLHXU and FLTRXRRSE) and Trike models. Softail models require separate purchase of Electrical Connection Kit P/N 72673-11. ’18-later Soft ail models require separate purchase of Electrical Connection Kit P/N 69201750. ’14-’16 Touring and Trike models require separate purchase of Electrical Connection Kit P/N 69200722. ’17-later Touring and Trike models require Electrical Connection Kit P/N 69201599A. ’08-’09 models require separate purchase of Jumper Harness P/N 70415-08A, Connector P/N 72902-01BK, and Terminal Pin P/N 72990-01 (Qty 2). See instruction sheet for details. Does not fit ’08-’13 models with internally wired handlebars. The power wires for these grips must be wired internal of the handlebar. See accessory handlebars for specific heated hand grip exclusions.

Installation Instructions

Collection: Kahuna

Diameter: 1.58

Material Diameter UOM: Inches

Sold In Units: Pair

In the Box: Right and left hand grips, installation instructions

WARRANTY: 1 year limited warranty – Go to www.h-d.com/warranty for full details

Reviews (54)

4.28 Average Rating

Write a review

Rating Snapshot

Quality

Did Not Meet

Exceeded

CUSTOMER IMAGES

See all customer images

Showing 1-5 of 54

Sort by:

FEATURED REVIEW

5/2/2025

Heated Hand grips

Featured H-D Dealership H-D Employee Sweepstakes Entry - Verified Purchaser Top 10 Contributor Top 25 Contributor Top 50 Contributor Top 100 Contributor Top 250 Contributor

Quality

3
Did Not Meet
Exceeded

Fit and works great on my 2019 Triglide.

G White - West Alexandria Ohio

Add a comment

Helpful? Yes (0)

Report Reported
FEATURED REVIEW

4/19/2025

Great Grips.

Featured H-D Dealership H-D Employee Sweepstakes Entry - Verified Purchaser Top 10 Contributor Top 25 Contributor Top 50 Contributor Top 100 Contributor Top 250 Contributor

Quality

5
Did Not Meet
Exceeded
Very nice Grips, not too difficult to install. I am very happy I purchsed these, and Harley website made it a breeze to order online.
Mario Margherio - St. Louis, MO

Add a comment

Helpful? Yes (0)

Report Reported
FEATURED REVIEW

4/15/2025

Heated grips

Featured H-D Dealership H-D Employee Sweepstakes Entry - Verified Purchaser Top 10 Contributor Top 25 Contributor Top 50 Contributor Top 100 Contributor Top 250 Contributor

Quality

5
Did Not Meet
Exceeded

Not sure how I rode without heated grips. This is like night and day in terms of comfort. In my opinion heated grips are a necessity. They look nice too.

Grass Valley CA

Add a comment

Helpful? Yes (0)

Report Reported
FEATURED REVIEW

4/13/2025

Great Add To My Bike.

Featured H-D Dealership H-D Employee Sweepstakes Entry - Verified Purchaser Top 10 Contributor Top 25 Contributor Top 50 Contributor Top 100 Contributor Top 250 Contributor

Quality

4
Did Not Meet
Exceeded

Easy enough to install on my Street Glide but you do need some skills. Installation is not for the faint of heart because you need to take a lot apart. It is doable with time and patience. No real specialty tools needed. The end result is you’re going to love them. I hate being cold and these do the trick. Already have them on my Fat Boy. read more.

Monteman1971

Add a comment

Helpful? Yes (0)

Report Reported
FEATURED REVIEW

3/31/2025

Terrible waste of money

Featured H-D Dealership H-D Employee Sweepstakes Entry Verified Purchaser Top 10 Contributor Top 25 Contributor Top 50 Contributor Top 100 Contributor Top 250 Contributor

Quality

1
Did Not Meet
Exceeded

Install was easy and straight forward, took about an hour. These grips worked for 2 weeks about 7 or 8 times for around an hour each usage. Then they stopped heating up, no blown fuses or disconnected wires. For $300 dollars just terrible product.

VV_2021

Add a comment

Helpful? Yes (0)

Report Reported

of 11

Q&A (22)

Ask a question

Showing 1-5 of 22

Sort by:

Question:

7/15/2024

Will this fit my 2010 Flhtcui? I have located power supply connector and right side connector in the fairing. My throttle fly by has the two pin connector on the end. Do these have correct harnesses to plug and go with preset wiring already on bike?

Brandon B - NJ

Answer question
- Answer:
  
  Hello, Yes This part fits your 2010 Ultra Classic Electra Glide. Please contact your local H-D dealership for installation related items. Thanks.
  
  Akinator
  
  Helpful? Yes (0)
  
  Report Reported
Question:

4/28/2024

I have a 2015 Ultra Limited Low and the bars are smaller then a normal UL...does it fit? Does it need an insert or something?

Gus da Bear - Ottawa

Answer question
- Answer:
  
  Hello Gus da Bear, Kahuna Heated Hand Grips part number 56100318 is 1.58 in diameter. Thanks blairmke
  
  blairmke
  
  Helpful? Yes (0)
  
  Report Reported
Question:

4/15/2023

I have a 2014 ultra glide limited FLHTK with factory heated grips, will I need a wiring kit too. Install these Harley Kahuna heated grips. Thanks

Kennan - Ontario

Answer question
- Answer:
  
  If you already have heated grips they'll fit
  
  Venom
  
  Helpful? Yes (0)
  
  Report Reported
View 1 more answers Hide 1 answers
Question:

4/15/2023

I have 22 Tri glide without heated grips. What would I need to make these grips work?

Jamey - Texas

Answer question
- Answer:
  
  Hello Jamey, Fits ’16-’17 Dyna FXDLS, ’16-later Softail, and ’08-later Touring and Trike models. ’16-’17 Softail models require separate purchase of Electrical Connection Kit P/N 72673-11. ’18-later Softail models require separate purchase of Electrical Connection Kit P/N 69201750. ’14-’16 Touring and Trike models require separate purchase of Electrical Connection Kit P/N 69200722. ’17-later Touring and Trike models require Electrical Connection Kit P/N 69201599A. ’08-’09 models require separate purchase of Jumper Harness P/N 70415-08A, Connector P/N 72902-01BK, and Terminal Pin P/N 72990-01 (Qty 2). See instruction sheet for details. Does not fit ’08-’13 models with internally wired handlebars. Thanks read more.
  
  DoniD
  
  Helpful? Yes (0)
  
  Report Reported
Question:

3/7/2023

will these fit my 2007 road glide

kyle - scottsdale az

Answer question
- Answer:
  
  Hi Kyle, This part does not fit your 2007 Road Glide.
  
  RowdyGrl79
  
  Helpful? Yes (0)
  
  Report Reported