ตรวจสอบว่าอะไหล่นี้เข้ากันได้
อะไหล่นี้เข้ากับ ของคุณ
อะไหล่นี้ไม่เข้ากับ ของคุณ
อะไหล่นี้เข้ากับ ของคุณ

Daymaker LED Forward Auxiliary Lights

หมายเลขอะไหล่: 68000340

These rugged Daymaker® LED Forward Auxiliary Lights offer three-way function that will serve the adventure touring rider in any situation. Installed as a pair, each light has a three-beam, four-lens design within durable aluminum housing. In daylight these lights also make the motorcycle more conspicuous to other motorists. The factory-integrated design makes these lights easy to install and a perfect fit and look on the bike. *NOTE: Some local regulations prohibit using auxiliary lighting with high-beam lighting. Check local regulations before installation.

...อ่านเพิ่มเติม
These rugged Daymaker® LED Forward Auxiliary Lights offer three-way function that will serve the adventure touring rider in any situation. Installed as a pair, each light has a three-beam, four-lens design within durable aluminum housing. In daylight these lights also make the motorcycle more conspicuous to other motorists. The factory-integrated design makes these lights easy to install and a perfect fit and look on the bike. *NOTE: Some local regulations prohibit using auxiliary lighting with high-beam lighting. Check local regulations before installation.
Fog lights produce a wide pool of light directly in front of the motorcycle to light the edge of the road in low-visibility conditions
Driving lights punch light further down the road to augment headlight performance
Off-Road beams deliver 275-meter forward visibility and 50-meter side visibility to light up the trail (not street legal)
Powder coated lightweight aluminum housing
High-impact hard-coated and anti-fog coated outer lens
Installation requires separate purchase of appropriate Auxiliary Light Installation Kit

Fits '21-later RA1250, RA1250S and RA1250SE if Brush Guard is installed. Also fits '14-later Touring models (except '23-later FLHXSE, FLTRXSE, '24-later FLHX, FLTRX and FLTRXSTSE models). Stock '24 RA1250SE models. Lamps require additional installation kits as follows: '24 RA1250S models require 2x P/N 10200924, 2x P/N 10200691, 2x P/N 68000403, 2x P/N 69203245 and 2x P/N 10006 (Does not require purchase of a switch pack, lights are controlled through instrument menu on vehicle only). ‘21-'23 RA1250S and ’21-later RA1250 models require Install Kit P/N 68000343. '14-later Road Glide models require Install Kit P/N 68000342. All other '14-later Touring models require Install Kit P/N 68000341.

WARRANTY: 1 year limited warranty – Go to www.h-d.com/warranty for full details