Name: Empire Heated Hand Grips
Brand: Harley-Davidson
SKU: 56100436
Price: 373 GBP
Availability: InStock
Rating: 4.42 (12 reviews)

Make sure this part fits

Check fitment

Empire Heated Hand Grips

£373.00

4.42

See 12 reviews

Part Number: 56100436

Color: Chrome

Qty

Free Shipping with £50 Purchase

Free Returns

Add to Cart

Add to wish list Find in store

Combine style and comfort for cool morning or frigid night rides. These thermostatically controlled grips feature variable heat settings controlled with a military grade resistor, and use automatic temperature monitoring to adjust to ambient temperatures. Grips have been thermally mapped to provide a more-uniform heat and are designed to achieve a maximum operating temperature approximately 20° Fahrenheit warmer than previous accessory heated grips for added warmth during cold rides.

Description

• With both hands on the grips, they remain at a constant temperature regardless of changes in outside temperature

• Self-contained control circuit and control knob means no additional switches or controller boxes to mount

• Switched on/off with the ignition to avoid draining your battery

• Easy-to-install glueless design allows removal of the grips for servicing without damage

• Rubber surface for positive grip in wet or dry weather plus inset classic Harley-Davidson branding for added style

• Complements the Chrome Empire^™ Collection Control and Engine Trim

Details

Fits ’16-’17 Dyna FXDLS, ’16-'24 Softail and ’08-later Touring (except '23-later FLHXSE, FLTRXSE, '24-later FLHX, FLTRX and FLTRXSTSE and '25-later FLHXU and FLTRXRRSE) and Trike models. Softail models require separate purchase of Electrical Connection Kit P/N 72673-11. ’18-later Soft ail models require separate purchase of Electrical Connection Kit P/N 69201750. ’14-’16 Touring and Trike models require separate purchase of Electrical Connection Kit P/N 69200722. ’17-later Touring and Trike models require Electrical Connection Kit P/N 69201599A. ’08-’09 models require separate purchase of Jumper Harness P/N 70415-08A, Connector P/N 72902-01BK, and Terminal Pin P/N 72990-01 (Qty 2). See instruction sheet for details. Does not fit ’08-’13 models with internally wired handlebars. The power wires for these grips must be wired internal of the handlebar. See accessory handlebars for specific heated hand grip exclusions.

Installation Instructions

Collection: Empire

Diameter: 1.6

Reviews (12)

4.42 Average Rating

Write a review

Rating Snapshot

Showing 1-5 of 12

Sort by:

FEATURED REVIEW

5/5/2024

awesome grips

[This review was collected as part of a promotion.] look great, feel great!

juice - yuma arizona

Add a comment

Helpful? Yes (0)

Report Reported
FEATURED REVIEW

12/11/2023

Heated grips

[This review was collected as part of a promotion.] Very nices Grips work fine but installations informations were not clear. Lucky there was video o the web.

Emile - St-Hilaire Quebec

Add a comment

Helpful? Yes (0)

Report Reported
FEATURED REVIEW

4/5/2023

Game Changer

[This review was collected as part of a promotion.] Installed these grips on 22 Street Glide and could not be more satisfied. These heat up nice, rode in a 60 degree day and had to turn them off. Went out on 54 degree and did not need more than 2. Cannot hold them with bare hands on 6, they get so warm. Install was not bad , very hard to find power line but did find it. Did not need the electrical connector kit as both wires were there. read more.

KpTomkat - Avon, Ohio

Add a comment

Helpful? Yes (0)

Report Reported
FEATURED REVIEW

1/27/2023

Worth the money

[This review was collected as part of a promotion.] High recommend, fits perfectly very comfortable, a big big difference in the look

Nashua

Add a comment

Helpful? Yes (0)

Report Reported
FEATURED REVIEW

5/16/2022

Fitment issue!

[This review was collected as part of a promotion.] I’ve installed HD heated grips previously and I was looking forward to installing these on my Street Glide. Everything was going smoothly until I got to reinstalling the left switch cover. The two cover halves would not go together completely without there being an almost 1/8” gap at either top or bottom (or a 1/16” gap at both top and bottom). I spent a solid hour repositioning the grip, switch covers, researching online, etc. and finally determined there’s a high spot on the part of the grip that sits in the rear switch cover channel. With the bike apart and grips semi-installed and “used”, returning them was not an option. I ended up having to use a Dremel on the plastic part of the left handgrip that was preventing the switch covers from being installed correctly. I used a grinding wheel to remove some of the plastic. I found some others online who said they had a similar issue with HD heated grips being a little oversized for the switch covers. I’m very perplexed how something like this can happen with all OEM parts. This was a pretty infuriating experience considering the price of the grips, and that I was installing it on a stock Street Glide Special, a fairly premium bike. These should've fit like a glove. Once I got past this (major) issue, install was smooth, due in large part to the 2014 and up touring bikes being prewired for heated grips. I’ve done a lot of Harley mods over the years and this is the first time I’ve ever had OEM parts that didn’t fit right. The grips work as expected and look amazing. read more.

DaveinPA - PA

Add a comment

Helpful? Yes (0)

Report Reported
- I had the same issue. I learned the problem was the new grips 'rubber' portion is too hard, not allowing the tabs on the switch covers to press into the rubber, holding them apart. I gently filed the tabs and ground out some of the hard rubber. Fixed!
  
  Todd - Peoria, AZ
  
  12/8/2022

of 3

Q&A (9)

Ask a question

Showing 1-5 of 9

Sort by:

Question:

3/29/2025

When is Harley releasing these for the ‘24 bikes??? Especially the SG’s

What about the new bikes - AR

Answer question
- Answer:
  
  Hi AR: We have: Kahuna Heated Hand Grips Part Number: 56100713 Color: Gloss Black Kahuna Heated Hand Grips Part Number: 56100714 Color: Chrome Switchback Heated Hand Grips Part Number: 56100574 Color: Black Anodized Switchback Heated Hand Grips Part Number: 56100575 Color: Clear Anodized Thanks read more.
  
  princessv
  
  Helpful? Yes (0)
  
  Report Reported
Question:

2/18/2025

Does a 2010 HD CVO Street Glide need an additional wire harness to install these grips? Thankx

Field

Answer question
- Answer:
  
  Hi Field: This part does not fit your 2010 CVO Street Glide. Thanks
  
  princessv
  
  Helpful? Yes (0)
  
  Report Reported
Question:

6/2/2024

I have a ‘16 CVO ROAD GLIDE ULTRA with factory heated grips. Will I need PN 69200722 to make these fit?

CVOJON - SC

Answer question
- Answer:
  
  Hello CVOJON, This part number Part Number: 56100436 Empire Heated Hand Grips does not fit your 2016 CVO Road Glide Ultra. Thanks DoniD
  
  DoniD
  
  Helpful? Yes (0)
  
  Report Reported
Question:

4/19/2023

DOES HARLEY OFFER ACCESSORY HEATED GRIPS FOR 23 TOURING THAT ARE INTERNALLY WIRED IF SO WHAT COLLECTION???

TIFFANY - YORK

Answer question
- Answer:
  
  Hi Tiffany, The wiring for the "Empire" or "Airflow" heated hang grips are installed internally. We may have other internally wired grips on our website. We recommend you review the details subsection for the grips you're interested in for further clarification. Otherwise, you're welcome to contact your local dealer for further assistance. Thank you! read more.
  
  QuickShift
  
  Helpful? Yes (0)
  
  Report Reported
Question:

3/1/2023

Hi Does this Empire Heated Hand Grips fit in 2019 Ultra Limited without additional electrical connection kit? Thanks

William - Florida

Answer question
- Answer:
  
  William Per the details tab on product page, Fits ’16-’17 Dyna FXDLS, ’16-later Softail, and ’08-later Touring and Trike models. ’16-’17 Softail models require separate purchase of Electrical Connection Kit P/N 72673-11. ’18-later Softail models require separate purchase of Electrical Connection Kit P/N 69201750. ’14-’16 Touring and Trike models require separate purchase of Electrical Connection Kit P/N 69200722. ’17-later Touring and Trike models require Electrical Connection Kit P/N 69201599A. ’08-’09 models require separate purchase of Jumper Harness P/N 70415-08A, Connector P/N 72902-01BK, and Terminal Pin P/N 72990-01 (Qty 2). See instruction sheet for details. Does not fit ’08-’13 models with internally wired handlebars. The power wires for these grips must be wired internal of the handlebar. See accessory handlebars for specific heated hand grip exclusions. read more.
  
  H9FXE
  
  Helpful? Yes (0)
  
  Report Reported