Registration confirmed
You are now registered for Harley-Davidson email.
Check your email for periodic updates on this exciting event.
Make sure this part fits
This part fits your .
This part does not fit your .
This part fits your .
You are purchasing for this VIN: .
VIN required for purchase
Directional Relocation Kit
Part Number: 53968-06C
Qty
Free Returns
Notify me when this item is available.
Item will be sold in-store only.
Required for installation of Detachable Sideplate Kit P/N 52866-06 on Dyna® models without saddlebags.
...Read More
Reviews (3)
Showing 1-3 of 3
Let us know what you think.
Write a review
-
FEATURED REVIEW4/15/2020Avoid Like The Plague[This review was collected as part of a promotion.] Poorly designed kit. Hollow bolts are easy to break during installation, and flex under the weight of a passenger leaning on the sissy bar. If bolts are over-inserted, and don't immediately break, they will break the threaded bung off of the fender backing plate because some weld material overhangs the hole where the bolt passes through. I never have problems with HD made accessories, but this one needs to go back to the drawing board. I've gone through two sets of these (both of which, upon failure, left me with turn signals/brake lights dangling) and am now removing the entire OEM assembly in favor of LED under the fender lighting (aftermarket). read more.
-
I had the same problem and mine broke as well! Poorly designed and not what I expected at this price. I fabricated my own set up and not only does it look better, it is also stronger!- Canada8/26/2020
-
-
FEATURED REVIEW11/11/2016Perfect fitI needed this part to install the sissy bar on my fxdb. It was a simple install but I didn't splice the wires like instructions say to. I also needed the license plate relocation kit that comes with new wires that you install thru turn signal socket
-
FEATURED REVIEW11/2/2016Poor quality.I was greatly dissatisfied with the poor quality of the parts in this kit. I find the design to be less than satisfactory as well. Parts are not made large enough to fit the wiring which frays easily. One of the bolts provided in this kit also broke before I could tighten it. If you don't tighten it properly the tailights will vibrate loose. Very poor craftsmanship and design here. If you buy this kit be prepared for a frustrating experience and be very careful as the parts are extremely delicate. I will look to go aftermarket for my next modification. read more.
-
Mine did the same thing, broke in nearly the same place. Awful design! Harley claims to be a premium bike but crap like this proves otherwise.- Maryland4/24/2022
-
Mine did the same thing, broke in nearly the same place. Awful design! Harley claims to be a premium bike but crap like this proves otherwise.- Maryland4/24/2022
-
Wish I never installed this kit. I've had propblem with the front and rear rear relocation kit bolts breaking. I said the heck with buying the bolts again and used metal JB Weld epoxy. Though it's a permanent solution it's stronger and holds better now.- TX6/19/2020
-
FEATURED REVIEW
Featured
H-D Dealership
H-D Employee
Sweepstakes Entry
Verified Purchaser
Top 10 Contributor
Top 25 Contributor
Top 50 Contributor
Top 100 Contributor
Top 250 Contributor
-
Response from H-D Team
Q&A (7)
Showing 1-5 of 7
Be the first to ask a question.
Ask a question
-
Question:4/19/2023I have a 2015 street bob and just bought this kit but need replacement rear lights….what lights will I need to buy that will fit the threads on this hardware?Sage - Shelton
-
Answer:Sage, You can use lighting of your choice as long as it fits your bike and it's Non-LED. LED will not work with this directional kit. Thanks!
-
-
Question:4/7/2019Will this work with LED inserts in stock signal housing on 2013 street bob?Lj42avs - NH
-
Answer:Hello Lj42avs, No these will not work with the LED turn signals. Thank you, wildonemke
-
-
Question:9/1/2015What would be the alternative for FXDB HDI?Ciro - Brazil
-
Answer:Hi Ciro, 2013-later FXDB HDI/India models require the separate purchase of Docking Hardware and Relocation Kit P/N 68900499. Thank you for you question.
-
-
Question:2/27/2015Is this required for the 2009 Street Bob when installing the detachable back rest, part number 52300046?JohnD68 - Tucson AZ
-
Answer:Hi JohnD68, Yes, Directional Relocation Kit (P/N 53968-06C) is required in addition to the docking hardware, when installing a detachable backrest on a 2009 FXDB without P&A saddlebags. To find this information, click on the Dyna Docking Hardware Matrix link, under the "More Info" tab. Thank you for your question. read more.
-
-
Question:6/4/2014fitmentSirBandar - Arlington VA
-
Answer:Hi SirBandar, Yes, this will work on your 14' Low Rider. Thank you
-
Answer:
Recently Viewed
©2025 H-D or its affiliates. HARLEY-DAVIDSON, HARLEY, H-D, and the Bar and Shield Logo are among the trademarks of Harley-Davidson Motor Company, Inc. Third-party trademarks are the property of their respective owners.
©2025 H-D or its affiliates. HARLEY-DAVIDSON, HARLEY, H-D, and the Bar and Shield Logo are among the trademarks of Harley-Davidson Motor Company, Inc. Third-party trademarks are the property of their respective owners.